I have not had a problem with dissolving but my last order had a lot of dust. I like the flakes vs beads but the dust can be a problem when pouring.
Tweet For the kitchen exhaust cleaning contractor almost any cleaner you would want to use on the market today will be based on one or the other of these chemicals, or be a combination of the two.
You need to understand their differences, pros and cons to be able to best choose a product to fit your needs. They are the most chemically similar of the hydroxides. They are both a white, strong alkaline, corrosive solid or powder. Sodium Hydroxide is more commonly known as lye or caustic soda where Potassium Hydroxide is known as potash.
Both are used to change fats into soap in a process called saponification.
-Activated Charcoal: Acts like a magnet to attract and absorb dirt and oils.-Black Currant Oil: Antioxidant properties to nourish dry damaged skin and restore its natural glow. Black Currant Fruit Extract, *Sodium Hydroxide, Palm Oil, Coconut Oil, Unrefined Hempseed Oil, Olive Oil, Sunflower Oil, Safflower Oil, Black Currant Seed Oil, Activated Charcoal (Derived from Coconut Shells and Bamboo. Usually, saponification is a process by which triglycerides are reacted with sodium or potassium hydroxide (lye) to produce glycerol and a fatty acid salt, called 'soap'. The triglycerides are most often animal fats or vegetable oils. When sodium hydroxide is used, a hard soap is produced. Using. Surfactants are one of many different compounds that make up a detergent. They are added to remove dirt from skin, clothes and household articles particularly in kitchens and bathrooms.
Even though their solubility in room temperature water are about the same, products made with potassium hydroxide exhibit a greater solubility especially as you increase the temperature of the water.
Like all strong bases, the reaction of both Potassium Hydroxide and Sodium Hydroxide with water is strongly exothermic, in other words, they generate heat and give off hydrogen.
But the reaction with Sodium Hydroxide is slightly more exothermic which can make up for other more positive factors that Potassium Hydroxide possess. The biggest difference between them is in cost because of certain factors; such as their production process by electrolysis, where potassium chloride costs more than sodium chloride table saltin ton quantities potassium hydroxide is about three times more expensive than sodium hydroxide.
Where as a coating of thicker or soft oil or grease could be cleaned by using a sodium hydroxide for less of a cost with lower temperature water required because of the better exothermic reaction. Using a product which contains both chemicals is like getting the best of both, you will be get a lower in price product with a better exothermic reaction than with Potassium Hydroxide alone, but you will have a faster penetration and better rinsing product than if it just had Sodium Hydroxide.In saponification, the metallic alkali, in this case sodium hydroxide (NaOH) or potassium hydroxide (KOH), breaks down the fat with which it is mixed.
In soap making, fats used can either be vegetable oils like olive oil, or animal fats. Katie Wells, CTNC, MCHC, Founder and CEO of Wellness Mama, has a background in research, journalism, and nutrition.
As a mom of six, she turned to research and took health into her own hands to find answers to her health problems. Sodium Hydroxide (Lye) - for Soap Making. Sodium Hydroxide, or Lye, is the chemical that induces saponification with fats and oils to create that magnificent thing called soap!
Sodium hydroxide is a popular strong base used in industry.
Around 56% of sodium hydroxide produced is used by industry, 25% of which is used in the paper industry. Sodium hydroxide is also used in the manufacture of sodium salts and detergents, pH regulation, and organic synthesis.
Saponification is the reaction between a fat or oil and a base, producing glycerol and a salt (soap) fat or oil + base → glycerol + salt (soap) Soaps are usually sodium or potassium salts of long-chain fatty acids.
An alkaline solution (often lye or sodium hydroxide) induces saponification whereby the triglyceride fats first hydrolyze into salts of fatty acids.
In today’s experiment you will prepare a potassium soap by the saponification of a fat with potassium hydroxide. You will use the potassium soap to make a sodium soap and. In simple terms, saponification is the name for a chemical reaction between an acid and a base to form a salt. When you make soap using the cold process soap making method, you mix an oil or fat (which is your acid) with Lye (which is your base) to form soap (which is a salt).. How exactly does this happen? Water soluble compound made by a reaction (called saponification) between caustic soda (sodium hydroxide) or caustic potash (potassium hydroxide) with animal and/or vegetable fats (oils). Soap has surface active properties (see surfactant) to wet a greasy (oily) soiled surface and suspend the oil and dirt in the water for rinsing off. Synthetic soaps (called detergents) are made from petroleum.
Glycerol (glycerin) is liberated. The glycerin can remain in the soap product as a softening agent, although it is sometimes separated.